超链
The main factors to pay attention to in the coating of aluminum alloy boats are the surface condition of the aluminum alloy and the atmospheric environment during coating. Typically, the coating temperature should be between 5℃ and 32℃, and the relative humidity should be below 85%. Painting is not allowed when the surface is affected by rain, fog, or snow. For special coating varieties, the coating should be carried out according to the requirements or guidelines of the supplier.
2022-09-23
铝合金艇涂装需要注意的主要因素是铝合金的表面状况和涂装时的大气环境。通常涂布温度应在5℃~32℃，相对湿度应在85%以下。当表面受到雨、雾或冰雪影响时，不允许涂漆。对于特殊的涂装品种，应根据供应商的要求或指导进行涂装。
The following points should be noted for the spraying construction of aluminum alloy boats: Before starting the coating construction, the construction personnel should check the spray gun and adjust it to produce the ideal spray pattern. Hold the spray gun so that the spray beam is always perpendicular to the surface and maintain a uniform distance of 25 to 30 centimeters from the surface being coated to prevent the hand and brain from moving in an arc.
2022-09-08
铝合金艇喷涂施工应注意以下事项:涂料施工开始前，施工员应检查喷枪，并调整喷枪以产生理想的扇面。握住喷枪，使喷束始终垂直于表面，并与被涂表面保持25至30厘米的均匀距离，以防止手和大脑变成弧形运动。
2022-07-26
When spraying aluminum alloy boats, the following points should be noted: Before starting the coating work, the operator should check the spray gun and adjust it to produce the ideal spray pattern.
2022-07-26
铝合金艇喷涂施工要注意以下要领：开始施工涂料前，施工者应检查喷枪，并调节喷枪以产生理想扇面。
E-mail:sales@cbboat.com
Telephone:0519-85719680
Address: 100 Xinfuwei, Xinhua Village Committee, Chunjiang Town, Xinbei District, Changzhou City
Changbo WeChat Public Number